Cricut, Silhouette or workshop laser: Diafane exports the real outline of every piece, at full size, as an SVG or DXF file, ready to cut.
In the Export and print tab of Workshop mode, click Templates by piece in the left column.
For an SVG or a PNG, choose Cut lines next in the Paths setting. A cutting machine reads this path. It is the recommended path for a Cricut or a Silhouette. The DXF always outputs the cut lines, with no setting.
The DXF is the exchange format cutting machines use. It contains lines, in the unit you chose in your Preferences. This file contains only the cutting outlines, one closed outline per piece, with no cames and no numbers.
The SVG also holds the outlines, as vectors. The PNG is an image: a machine finds no outline in it to follow.
A Cricut Venture holds a blade and a pen at the same time: Diafane prepares the file so the pen writes the numbers inside each piece.
Check Piece numbers before exporting the SVG. The numbers come out on a separate layer: simple blue strokes, placed at the center of each piece.
In the machine's software, set the blue layer to the pen (Draw in Cricut Design Space) and leave the black layer on cutting. The DXF does not carry the numbers.
For an SVG, the Grouping setting offers three choices. A single file holds all the pieces, each in its place on the cartoon. One file per piece produces a file for each piece, gathered in a ZIP archive. Per sheet packs the pieces on sheets of the chosen size. The PNG offers the first two choices. The DXF does not have this setting: it always outputs a single file with all the pieces, each in its place on the cartoon.
Choose Per sheet in Grouping, then the size in Sheet size: Mat 30.5 × 30.5 cm, Mat 30.5 × 61 cm, a paper format or a custom size. Diafane packs the pieces as tightly as possible, without ever cutting one, and produces one SVG file per sheet, gathered in a ZIP archive if there are several.
On a mat, the pieces stay within the area that Cricut Design Space accepts to cut, about 8 mm from the edge of the mat: check their position in the Design Space mat preview. A piece larger than the sheet is output on its own, at full size. The Rotate pieces and Fewest pages boxes also apply to these sheets.
When some pieces have a problem, Diafane opens the Check these pieces before cutting window before it writes the file. It names the pieces whose cutting outline is approximate, missing from the file or crossing itself.
Fix them, or choose Export anyway: the other pieces are correct.
Open the file in your machine's software and measure a piece whose size you know before you start cutting. Software that assumes a different unit can change the scale of your drawing on import.
These files contain outlines only. The material the machine cuts is set in its own software. Diafane does not control your machine: it only gives it the shapes to cut.
The Piece numbers link each cut shape to the cut list. In the SVG, they come out as single-line strokes, on a separate blue layer.
We verify your e-mail address, nothing else.