You can export or print the same drawing in four different ways, depending on what you need, from the assembly cartoon to machine cutting. The Paths setting in the Export and print tab lets you choose the one that fits your file.
Actual width draws the came, or the solder in Tiffany, at its real width. This path shows the look of the finished stained glass, but it is not the drawing to follow when cutting the glass.
Center lines outputs the bare path, as a line. In PDF and PNG, the thickness of the line is set in Line thickness (mm). In SVG, each line carries the actual width of its came: you take the drawing into another program with the right thicknesses. It is not used for cutting.
Reimport this SVG into Diafane, or rework it in another drawing program. A free account receives an SVG without the project settings: reimported, it gives lines at the project's came width.
Cut lines outputs the shape of each piece, adjusted to fit under the came or under the copper foil, as a thin line. A cutting machine reads this file. This path also serves as a light proof that you can print to check your drawing.
Cutting template reuses the cut lines, with the ink laid toward the inside of the piece and the surface hatched. Print this template at 100%, slide it under the glass and cut along the black outer edge. The gap between two pieces stays intact, whatever the thickness of the line.
The hatching keeps a template from being mistaken for a drawing of the cames. On a large cartoon, uncheck Hatching to save ink: the band along the edge is enough to follow the line.
For Center lines and Cutting template, the Line thickness (mm) block offers four steps: 0.5, 0.8, 1.2 and 2.0 mm. It appears under the Paths setting. By default, the center lines are at 0.5 mm and the template at 1.2 mm.
On the center lines, the line stays centered on the path: it extends half on each side, and only its middle gives the measurement. On the template, the line thickens toward the inside of the piece: its outer edge stays the cutting measurement, and the size of the pieces does not change.
The block is grayed out for the Cut lines, which keep a fixed thickness, and for Actual width, which draws the came at its true width. It is also grayed out for DXF and for the SVG of the center lines. Touch the of the block to read what applies to the chosen path.
Depending on how the file is used:
Assembling the stained glass: Actual width. Cutting by hand: Cutting template. Machine cutting: Cut lines. Reworking elsewhere: Center lines.
The Piece numbers option places the number of each piece in a badge on the drawing. This number links the template to the cut list and to the materials list.
You open the Paths setting by clicking the document in the left column of the Export and print tab. It applies to all the formats of the same document. Cartoon 100% offers the four paths, Templates by piece offers only Cut lines and Cutting template.
We verify your e-mail address, nothing else.