Move around and zoom in your drawing

Because drawings are vector-based, a project can measure up to ten meters on a side and display at more than 800% of its actual size, and the lines stay sharp. At 100%, the stained glass displays at actual size on any screen, once you have set the screen size. Move around with a mouse, a trackpad, two fingers on a tablet, or the keyboard.

Move and zoom with a mouse

The wheel moves the view up and down.

With Shift held down, it moves the view left or right.

To move in any direction, hold Space, whatever tool is selected: the pointer becomes a hand, and you just drag the drawing.

You can also drag the drawing while holding the wheel down, without touching the keyboard.

To zoom, turn the wheel while holding Ctrl, or Cmd on a Mac. The view zooms toward the point under the pointer.

Two thin scroll bars also run along the bottom and the right edge of the drawing. Drag one to scroll the view.

Move with a trackpad

On a laptop trackpad, drag two fingers in the direction you want to move the view.

Spread two fingers apart to zoom in.

Pinch two fingers together to zoom out.

Move on a tablet

The stylus is for drawing only.

On an iPad or an Android tablet, place two fingers on the screen and drag them to move the view.

Spread two fingers apart to zoom in.

Pinch two fingers together to zoom out.

Zoom to an exact value, or bring the whole drawing back into view

At the top right of the drawing, the zoom capsule has four controls. Zoom out and Zoom in change the zoom one step at a time. The percentage between them opens a list: enter a value, or choose a step from 25 to 800%. Fit to screen brings the whole drawing back into the window when you no longer know where you are.

At 100%, the drawing displays at actual size, as long as Diafane knows the size of your screen. To tell it, open the percentage list. The Set the screen size button, to the right of the 100% step, opens a window with a drawing of a bank card. Hold a real card against the screen, then enlarge or shrink that drawing until it covers the real card. The setting is saved in your account, for each device.

Zoom with the keyboard

Hold Ctrl, or Cmd on a Mac. Press + to zoom in, - to zoom out, and 0 to bring the whole drawing back into the window, the same as the Fit to screen button.

Interact with the stained glass in Light mode

In Light mode, the view does not move flat across the drawing. It rotates around the stained glass, with gestures specific to this mode. The zoom capsule keeps Zoom out, Zoom in and Fit to screen. In this mode, Fit to screen reframes the view on the stained glass.

Start for free, with three projects.

Sign up for free

We verify your e-mail address, nothing else.