In the right panel, you set each path with exact values: position, size, rotation, lead. Several came widths can be mixed in a single stained glass window.
The Align row of the right panel appears as soon as an element is selected.
With a single element selected, it aligns that element to the cartoon.
With two or more elements selected, a toggle switches between aligning the elements with each other and aligning them to the cartoon.
Its buttons align the edges or the centers of the selected elements, came included.
With three or more elements selected, use the distribution buttons to even out the gaps between these elements.
To the right of the Transform title, a small nine-dot button shows the reference point of the selection. This point is the default center of the transformations and moves you make next.
For example, when you enter a width or a height, the shape grows from this point, and rotation and mirroring also start from it.
Click the button to open the square of nine points, then click the one you want to keep as the reference.
The two fields X and Y give the position of the reference point of the shape, came included, measured from the top left corner of the cartoon. In Tiffany, the solder is included.
Enter a value to correct the position of a shape without redrawing the path.
When the cames are hidden in the Display menu, X and Y give the position of the paths alone.
The W and H fields give the width and the height of the selection, came included: these are the workshop dimensions. In Tiffany, the solder is included. They are displayed in the unit chosen in your Preferences. Enter an exact value instead of trying to reach it by dragging: Diafane adjusts the path so that the shape, came included, has the size you entered.
When the cames are hidden in the Display menu, W and H give the sizes of the paths alone.
The link between the two fields locks the proportions: when it is on, changing one dimension adjusts the other proportionally.
The Rotation field gives the angle of the shape. Two buttons rotate it a quarter turn in either direction.
Two other buttons, in the Flip row, mirror it horizontally or vertically.
The Lead block, under Transform, sets the came of the selected path. Each row is one setting:
Type: the profile, H or U. Position: the came is drawn centered on your path, or to its left or right. End caps, on an open path: Overhang extends the came beyond the last point, with rounded corners, and Flush stops it right there, with square corners. An overhanging came can make up for paths that do not touch perfectly. Width: the overall width of the came, flanges included. It is the thickness of the black line on screen, not the cutting line. Heart: the central part of the came, the part that slides between two pieces of glass. The glass slides under the flanges and stops against the heart.
In Tiffany, the Lead block becomes the Solder block, and its rows take the vocabulary of the technique:
Solder line width: the width of the visible solder. Spacing: the space taken up by the copper foil.
The Type row disappears: a solder line has no profile.
Under the block, the Apply to all paths in the project button extends the technique and the values of the selected path to all the cames, after confirmation.
In the confirmation window, a checkbox also makes these values the project defaults, for future paths.
You can also set these defaults for the whole project, in the Technical tab of the Project settings.
When a path is selected, two buttons appear at the bottom of the panel, on the left. Duplicate makes a copy of the selection. Delete deletes it. You can undo a deletion with Undo.
The Collapse button, at the bottom of the panel, folds the panel against its edge and gives its width back to the cartoon. The same button opens it again. The selection is kept.
With no path selected, the panel shows the active tool and its settings. There you set the sides of a polygon, the dimensions of a rectangle, the thickness of a reinforcing bar, and so on.
What you enter there applies to the next path. For a rectangle, an ellipse or a polygon, once you have entered the values, a single click on your cartoon creates the shape.
Most rows have a at their right end. Click it to see, in one sentence, what the setting changes. It disappears if you hide the Help bubbles in the Preferences, Interface tab.
On a tablet, a number field opens Diafane's numeric keypad. In a field, the up and down arrow keys change the value by one step. With Shift, the step is ten times larger.
We verify your e-mail address, nothing else.