Draw accurately: snapping, exact dimensions and alignment

Snapping joins your paths, fields let you enter each dimension, and the 100% zoom shows the drawing at actual size. Everything you need to place your lines accurately.

The five things your point can snap to

The Snap button in the left rail opens a menu. Its Enable snapping switch, at the top, turns all the snaps on or off in one move. Below it, five toggles:

Grid: snaps your points to the grid lines. Snapping to the grid has no effect while the grid is hidden. Guides: snaps to the guides pulled from the rulers, and to the edges and corners of the cartoon. Lines and points: snaps to paths that are already placed. Smart Guides: shows a marker when one shape lines up with another or when the gaps become equal. Symmetry axes: snaps to the symmetry axes, only when symmetry mode is on.

Which snap wins when several could apply

The points and lines of your drawing come first, then the guides, then the grid. A connection between two paths therefore always wins over a grid alignment, even if both are within reach.

A line that keeps landing next to the spot you aim at almost always comes from the Lines and points snap. Turn off Enable snapping and redraw: if the line lands right, a snap is to blame. Turn the switch back on, then turn the rows off one by one to see which one gets in your way.

Place your own guides

In Cartoon mode, the Rulers line of the Display menu shows the rulers at the top and on the left of the cartoon.

Drag from a ruler onto the cartoon to place a guide. Drag the guide back onto its ruler to remove it.

You set whether a guide is displayed in Display, and whether it snaps in Snap. A guide can therefore stay visible without attracting your paths.

Give your paths precise dimensions

Select a shape. The fields in the right panel hold its position, its width and its height, came included, then its angle. Enter an exact value instead of trying to reach it by dragging.

The link between the width and height fields locks the proportions: when it is on, changing one dimension adjusts the other proportionally.

The arrow keys move the selection one step at a time. With Shift, they move it ten steps. With Alt, a tenth of a step.

Align elements

Select one or more elements: the Align row appears at the top of the right panel.

With a single element selected, it aligns that element to the cartoon.

With two or more elements selected, it can also align the elements with each other, by their edges or by their centers, horizontally or vertically. The two buttons at the top right of the row choose the target: aligns to the cartoon, aligns the elements with each other.

With three or more elements selected, the distribution buttons even out the gaps between these elements.

The alignment measures the elements came included, or the paths alone when the cames are hidden in the Display menu.

See the drawing at actual size

The percentage in the zoom capsule, at the top right of the drawing, opens a list of steps: 25, 50, 100, 200, 400 and 800%. At 100%, the cartoon displays at actual size: a piece measured on screen with a steel rule then measures its true size.

For this, Diafane needs to know your screen size, and no browser provides it. The Set the screen size button, to the right of the 100% step, opens a window that draws a bank card.

Place a real card against the screen, then enlarge or shrink that drawing until it covers the real card. The setting is saved in your account, for each device: a Mac and a tablet each keep their own.

Until you do this, the percentages are estimates.

You set the distance below which a point connects to a neighboring path, Min. distance between paths, in the Preferences, Drawing tab.

On a tablet, everything works without a keyboard: you set snapping with your finger in the rail, and dimensions with Diafane's numeric keypad.

Start for free, with three projects.

Sign up for free

We verify your e-mail address, nothing else.