See the sun shine through your stained glass before you install it, on any day of the year and at any hour! Two tabs: Manual, to place the sun yourself, and 365 days, to follow its real path at the installation address.
In the Manual tab, drag the sun across the sky dome to choose its direction and its height, from the zenith to the horizon.
Four sliders then set the light: Intensity, Temperature (from warm light to cool light), Solar halo, intensity and Solar halo, concentration. The two Solar halo sliders appear only on a dark background.
The Reset button returns the position of the sun and the four sliders to their original settings.
The 365 days tab first asks for the address where the stained glass will be installed. Enter it in the Project settings, Location tab: a link in the tab leads straight there.
Then turn the Stained glass orientation dial toward the direction the opening faces. Set the Time and the Day of the year with the two sliders. The light shown is the light of that place, at that moment.
The Play button moves time forward, and the light passes through the stained glass. Four speeds are available, from x1 to x360 times real speed.
The diagram shows the path of the sun on that day. Click the diagram to jump straight to a given moment.
On a Tiffany project, the toolbar at the bottom offers three patinas for the solder, to the right of the two tools: Silver patina, Copper patina and Black patina. Click or touch the button to unfold the choices, then choose the patina you want.
The patina changes the look of the rendering, without affecting the dimensions or the measurement.
At the bottom of the panel, the Texture strength selector sets how much relief the glass shows in the rendering (hammered, streaky, and so on). Its three buttons are eyes: Off turns the textures off, Medium is the default setting, and Strong shows the relief at full strength.
Choose Off if the display slows down. This setting is the same in Color mode. Workshop mode has its own setting, with textures turned off by default.
At the bottom right of the drawing, the Scene background button shows the current background. Click or touch it to open, at the bottom of the drawing, the Backdrop drawer: Dark background and Light background first, then the backdrops. Click or touch a thumbnail to set the stained glass in front of it. The chevron collapses the drawer.
The dark background makes the colors of the stained glass stand out as the light shines through it. On a light background, the stained glass appears in a lit room and the light casts its colors on the floor. In front of a backdrop, the backdrop shows through the pieces, distorted by the relief of the glass.
Every project opens with the dark background by default.
In the bottom bar, three tools set what happens when you drag with a finger or the mouse. Rotate the view pivots the camera around the stained glass. Move the view moves the camera. Move the sun places the sun under your finger or the pointer, in Manual mode.
Two fingers move and zoom the view, whatever the tool. With a mouse, holding the right button moves the view, and the wheel zooms.
To reframe the camera on the stained glass, click Fit to screen, in the zoom capsule at the top right.
The Capture rendering button, in the bottom bar, saves the scene as it is on screen, with its lighting and its angle. A preview opens so you can download the image or share it.
Without an installation address, the 365 days tab says that the address is missing and points to the Project settings. The address is what places the sun at a real location.
Light mode needs a browser that can display 3D. If yours cannot, the screen says so, and Cartoon and Workshop modes keep working.
We verify your e-mail address, nothing else.