Place guides, snap your paths, trace a photo, draw half of a rosette. The left rail brings together everything that helps you draw accurately.
The Display button opens the list of what sits on top of your cartoon without being part of it.
In Cartoon mode, the list offers the Rulers and the Grid, then the Guides, the Reinforcing bars and the Reference image once they are placed.
Each line turns on and off separately, and the eye on the right shows what is visible. These aids stay on screen: they are not part of your exports.
In Cartoon mode, the Leads line also hides the leads of the drawing, leaving only the paths on screen: the right panel then gives the position, width and height of the paths alone, and alignments are made on them. In Tiffany, this line is called Solder. Whichever display setting is chosen, the exports concerned always show the leads.
The Snap button opens a menu. Its Enable snapping switch, at the top, turns all the snaps on or off in one move. Below it, five toggles: Grid, Guides, Lines and points, Smart Guides and, when symmetry is active, Symmetry axes.
Snapping holds your point close to the grid, a guide, an existing path or a symmetry axis. The smart guides show a marker when one shape lines up with another.
With snapping off, the rows turn gray but keep their setting: they get it back when you turn the switch on again. The menu remembers your choices from one session to the next.
The Lock button fixes an element where it is. It stays visible, and your points still snap to it, but dragging no longer moves it.
The menu lists the Guides and the Reinforcing bars as soon as the project contains any. It offers the Symmetry axes in symmetry mode, and the Symmetric paths outside that mode. Each one locks separately. Cames always stay editable.
The Warnings button, under Lock in Cartoon mode and under Display in Workshop mode, marks the drawing in red when something deserves a second look. Three symbols appear there: a circle for two paths that do not meet, a triangle for a shape that is hard to cut, a cross for a piece that is too small to cut.
Click the Warnings button to open its menu. The switch at the top shows or hides the marks, and each symbol turns off separately. With the switch off, the rest of the menu is grayed out. At the very bottom, Strictness sets the severity of the circles, between Tolerant and Strict.
The calculations run only when you are not drawing. While they run, the icon becomes an animated circle.
In Cartoon and Color modes, Back view flips the cartoon on screen, as seen from the other side of the panel.
It is a frozen, read-only image: the project is not changed and cannot be changed. Click the button again to close it.
The Symmetry button opens a menu to place a vertical axis, a horizontal axis, or both. What you draw on one side appears on the other when you release.
It is not just a mirror effect on the screen. It is real geometry, and it counts in your pieces, in the measurement and in your exports.
A path drawn in symmetry is edited in symmetry mode. Outside that mode, editing it opens a choice: Switch to symmetry mode to get the mirror back, Break apart symmetry to turn it, with its copies, into independent paths, or Do nothing.
The Templates button opens a palette with two tabs. Drawings offers six-ray or eight-ray rosettes, a Gothic rose, a fan, a trefoil, and so on. Patterns offers tilings: checkerboard, diamonds, honeycomb, and so on.
Select a template, set its options if the Options button is offered, then click Add. The template becomes an ordinary path, which you can edit like the rest of your drawing.
The Reference button opens the reference image bar. Import a reference image places a photo, a scan or a drawing made elsewhere under your cartoon, which you then trace over.
At the top of the bar, the Reference image part places and adjusts the image:
Frame (a): move the image and resize it with its handles. Perspective (b): move each corner to straighten an image taken at an angle. Opacity (c): drag the slider until your lines stay readable. Replace (d): choose another file. Hide (e): the image is no longer displayed, but stays in the project. Delete (f): Diafane asks for confirmation, then removes the image from the project.
Below, turn on Detect the paths (g): Diafane finds the shapes in the image and shows a preview of the paths on your drawing. Preview, Smoothing and Sensitivity (h) adjust it live.
Cancel (i) undoes everything since you opened the bar. The black button (j) closes it: it shows Finish, or Add 42 paths and finish when the switch is on.
The image is kept with the project, but it is never included in an export.
In Cartoon mode, the Measure button (M) gives the distance between two points, with the horizontal gap and the vertical gap. It lights up in gold, and its palette opens.
Drag from one point to the other, or touch the start then the end. The measurement stays displayed: pick up an end to adjust it. A touch elsewhere hides it, and the next touch starts another. The measurement does not change the drawing and disappears when you leave the tool.
The palette sets what the measurement snaps to: Points, Segment midpoints, Paths, Lead edges (Solder edges in Tiffany) and Cartoon edge. All turns them on or off together. The gold Enable measuring band turns the tool off. These choices are saved in your account.
The Commands button (Cmd + K) opens the list of everything the editor can do. The list narrows as you type. It covers changing tools, switching between modes, zooming, aligning, exporting, opening the project settings, and so on. It also recognizes everyday words: “node” finds Direct selection, “fill” finds Paint bucket.
Use it when you know the name of a command but not where it is.
The Help button puts a bubble on every command on the current screen, with a contextual explanation. The bubbles adapt to the current mode: the bubbles in Cartoon mode are different from those in Light and Workshop modes.
Click the button again to remove them.
The Collapse rail button, at the bottom of the rail, shrinks the rail to icons only, and the cartoon gains the width the labels took. All the buttons stay in place, and the name of each one appears when you hover over it.
We verify your e-mail address, nothing else.