Workshop mode prices your drawing and gets it ready for fabrication: measurement and estimated cost, piece-by-piece cutting progress, numbered templates and a full-size cartoon to print. Three tabs: Measurement and pricing, Fabrication and tracking and Export and print.
The Measurement and pricing tab counts the pieces, their area, glass by glass, and the length of lead came (in Tiffany, the solder and the copper foil). It calculates the cost from these.
The Glass table details each glass: number of pieces, area and cost. The table ends with the Project total. Hover over a row: the pieces of that glass stand out on the drawing.
When some pieces have no glass yet, a “unassigned” button, preceded by their number, appears in the Total area card. Hover over this button: these pieces stand out on the drawing.
A pie chart shows the distribution of the surfaces by glass, with the percentage of each glass in the legend. The least-used glasses are grouped under Other.
The amounts come from your prices, which you enter in the Preferences, Pricing tab. The prices cover glass, lead came and, for Tiffany, solder, copper foil and zinc channel.
A glass you created has its own price, which takes precedence over the general price.
You then apply the margin you want ;)
The Fabrication and tracking tab lists each piece with its number, its glass and its status. Click the status disc of a piece to move it from To do to In progress, then to Done.
The Progress bar shows the overall state of the fabrication. Its three capsules (to do, in progress, done) hide or show, on the drawing, the pieces of each status.
The search finds a piece by its number or by its glass.
The note button, on the right of each line, opens a window where you can enter a free-form note. The note stays with the project, and its button appears filled to show that a note exists. Click that button to reopen the note.
In the Export and print tab, first choose, in the left column, what you want to produce. Five documents are offered: Presentation, Cartoon 100%, Templates by piece, Cut list or Materials list. Click a document to open its settings, if it has any.
Then choose the format of the document: PDF, SVG, PNG, DXF or CSV, depending on the document. Each format opens with its settings and its Preview, Download and, for PDF, Print buttons.
The Cut list groups identical pieces on one line: their numbers are written as a range (“1-3 × 3”), with the area and the cost of the whole line. Flipped pieces are counted separately, in the Flipped column. On the cartoon, each piece keeps its number.
The measurement and the fabrication count only closed pieces.
We verify your e-mail address, nothing else.